Metal Tech 4x4 FJ Cruiser/4Runner Offset Rear Lower Replacement Links

Description
Additional Information

Metal Tech 4x4's offset lower links are designed for the 3rd Gen 4Runner featuring Currie Johnny Joints.

By doing an offset notch we simply moved the bushing to sit higher on the link tube which in turn provides greater clearance between the axle housing and the link. Our offset lower links will not bind at full articulation and vertical travel when used with our rear long travel system and other 2" lifts. Also another benefit to the offset notch is a smooth sliding transition when rubbing up against an obstacle. Links with a standard notch have an uneven sliding surface which can cause damage to the axle mount, while the offset notch allows the link to sit lower allowing full protection against rocks, trees, and other objects.

Metal Tech 4x4 offset lower links are made out of 1.75 x .290 DOM tubing, cnc machined to accept Currie 2 1/2" Johnny Joints, poly urethane bushings, 1" DOM sleeve with .25" wall support and a grease zerk for maintenance. All of our links come with the hardware necessary to mount the e-brake cable to the link.

These links have a limited lifetime warranty on the structure of the link (the tubing and the bushing shell) this does not cover the wear items such as the polyurethane bushings, johnny joint and grease zerks. (sold as a pair)

Sold as a set (left and Right).

Estimated Install Time: 1.5 hours

Install Guide

Metal Tech 3Rd Gen 4Runner Offset Rear Lower Links fits the following vehicle(s):

1995 - 2002 Toyota 4runner

Make:: Toyota
Model:: 4Runner
Year:: 2002
Year:: 2001
Year:: 2000
Year:: 1996
Year:: 1997
Year:: 1998
Year:: 1999
Year:: 1995