Metal Tech 4x4 FJ Cruiser Phantom Front Bumper
*This bumper comes RAW. Powder coating optional. Minimum of 2 weeks processing time for the powder coating. Pictures show RAW and Powder Coated options
Stage 1 comes with:
- Winch ready two part bumper mounting system
- Powder coated lower stone guard
- Integrated 3/4" pull points mechanically locked back into the winch mount
- Powder coated hoop with light mounts
- Bumper hardware
- Winch mount & stone guard hardware
- Hoop hardware
- Laser cut LED fog light pockets
- Laser cut LED center 30" single row light bar pocket
- Weight: 110lbs
Stage 2 comes with:
- Winch ready two part bumper mounting system
- Powder coated lower stone guard
- Integrated 3/4" pull points mechanically locked back into the winch mount
- Powder coated hoop with light mounts
- Bumper hardware
- Winch mount & stone guard hardware
- Hoop hardware
- Laser cut LED fog light pockets
- Laser cut LED center 30" single row light bar pocket
- +2 OPOR 20w LED fog lights
- Weight: 114lbs
Stage 3 comes with:
- Winch ready two part bumper mounting system
- Powder coated lower stone guard
- Integrated 3/4" pull points mechanically locked back into the winch mount
- Powder coated hoop with light mounts
- Bumper hardware
- Winch mount & stone guard hardware
- Hoop hardware
- Laser cut LED fog light pockets
- Laser cut LED center 30" single row light bar pocket
- +2 OPOR 20w LED fog lights
- + OPOR 90w 30" LED single row spot/flood combo light bar w/ harness, relay and switch
- Weight: 124lbs
Accessories Options:
- Grill Insert Light Bar Delete (SKU #MT-GSJ-33206)
- Winch Hole Covers (SKU #MT-GSJ-WHC)
- OPOR 90w 30" LED spot/flood combo light bar (SKU #OPOR-LED-DM01-90M)
Rock Sliders information and purchasing:
Sliders: SKU # OPOR-GSJ-22000
Install Guide | HOW TO PAINT RAW SLIDERS |
Fits the following vehicle(s):
- 2007-2014 Toyota FJ Cruiser
Estimated Install Time: 6 hours
The Metal-tech FJ Cruiser winch mount bumper comes completely powder coated and ready to bolt on with no bumper plastic cutting required. This armor option for the Fj Cruiser has 3/4" recovery points, included bolt on single hoop, and integrated pockets for the optional recessed LED fog lights and 30" LED single row light bar. Optional Grill Insert to cover opening if a light bar is not used.
We use state of the art design and engineering tools like 3D Scanning and Finite Element Analysis (FEA) to develop all of our bumpers. We analyze the products real-world physical behavior by virtually testing the CAD models against linear, non-linear, and dynamic loading, allowing us to raise product quality and product durability ensuring a long service life.
The Phantom front bumper is designed for maximum performance in a strong but lightweight package and features an all steel construction for durability and performance. Lower vented stone guard below bumper bolts 100% to the winch mount clearing lower frame cross support so almost all skid plate systems will work with our bumper. Large access points in the front bumper to allow ease of reach to your winch. Winch envelope is designed to hold even some of the largest planetary non integrated solenoid winches on the market.
Our two part mounting system first mounts the winch mount, allowing very easy installation of your winch, then the outer shell bolts to the winch mount allowing you to set the body alignment that you wish. With the high approach angle and close fit of the bumper it requires a winch with a low profile clutch handle as seen on Warn M8000 and similar winches. Our powder coated FJ Cruiser Winch Mount Bumpers feature full sandblasting, dip, bake and double black textured semi gloss powder coat finish two times the industry standard for thickness.
- Make:
- Toyota
- Model:
- FJ Cruiser
- Year:
- 2007
- Year:
- 2008
- Year:
- 2009
- Year:
- 2010
- Year:
- 2011
- Year:
- 2012
- Year:
- 2013
- Year:
- 2014
