Metal-tech 2021+ Ford Bronco 4-door Sliders

Bronco 2021+ 4-Door Frame Mounted Step Sliders  

Frame mounted step sliders: 100% bolt on, no drilling to your frame, keeping the sliders off the body mounts. We put the sliders to the strongest part of your Bronco, the frame. Body mounted "rails" cannot take the same loads as a real frame mounted slider. The Metal-tech 4x4 frame mounted step sliders can take the full weight of the truck, yet the flat top deck is a perfect step for getting in and out of your vehicle. Two dimple die 1/8" in. pressed step plates welded to the top of the sliders make for great access to get in and to reach cargo on your roof.     

Featuring Metal-tech 4x4s Trade Marked two stage rub rail, the primary DOM rail is out past the radius of your door, as you slide along it, the second stage engages and will push your truck away from the obstacle. U.S. Trademark Registration No. 4,010,850 

Metal-tech 4x4 2021+ Ford Bronco sliders are made 100% in the USA using 2"x4" wide, 3/16 thick US Made Steel box tube with mitered ends as the main slider body, 3"x1.5" box tube for support legs, custom laser cut mounting feet made out of 1/4" plate! Our rub rails are made out of 1.75"x.120" wall DOM SRA steel tube as standard for the best rocker protection and a confident recovery hi-lift jack point. 

Easy installation:  Mounting system is 100% bolt on, using a combination of sub brackets and U-bolts over the frame. Metal-tech 4x4 has used the same U-bolt system for over 20yrs in our proven FZJ80 and UZJ100 Landcruiser sliders. Conquering the toughest trails from Rubicon to Moab. Video installation guide below, with easy-to-follow step by step directions.   

Sliders finish - sandblasted and powder coated for durability.  

100% US Made, using US Steel, in house by Metal-tech 4x4  

This product features the use of Metal-tech 4x4's U.S. Trademark Registration No. 4,010,850 for the rail design.

Contains: 

1 - Left Bolt on Step Slider 

1 - Right Bolt on Step Slider 

1- Left Sub bracket 

1 - Right Sub bracket 

1 - Bolt kit  

Link to video installation guide