ICON 2007-UP Jeep JK 3" Suspension System - Stage 4

NOTE: Availability for this product may vary.  Please call for updated information.

Overview:

The ICON Vehicle Dynamics 3" Lift Suspension System is designed for Jeep JK owner's demanding the ultimate in performance and ride quality, without the larger stance you find in bigger lift systems on today's market. ICON's Jeep Wrangler JK 3" lift system is engineered with front and rear dual rate progressive wound springs which is the foundation for on and off road performance and suspension articulation. The dual rate design gives you a softer initial rate for superb on road comfort and a firmer than stock secondary rate that increases during compression for excellent bottom out control. ICON V.S. 2.5 Series Reservoir shocks are included front and rear to ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. Together the combination of ICON dual rate coils and V.S. 2.5 Series shocks adds 30% more wheel travel over stock, helping you rock crawl safer or soak up larger terrain at higher speeds keeping those wheels on the ground. In this Stage 4 system adjustable track bars are include front and rear for optimizing axle position to ensure your axles are perfectly centered under the vehicle. This ICON 3" JK lift system is designed from the ground up to give the 07+ Jeep Wrangler JK's the best performance, suspension handling / ride quality, and clearance for 33" tall tires (35" tall with installation of aftermarket high-clearance fenders).

Key Features:

• Dual Rate Coil Springs Front and Rear

• Adds 30% More Wheel Travel over Stock

• Level Stance Front to Rear

• Vehicle can be Returned Back to Stock

• No Welding or Cutting

• Includes High Performance Re-buildable / Re-valvable Reservoir 2.5 Series Shocks

• Out Articulates Most Long Arm Kits of Comparable Height

• Includes Adjustable Track Bars for Optimized Axle Positioning

• Pan Rod Bars include Dual Stage Bushing System and JM12T Rod End to minimize deflection while maximizing responsiveness

• Made in the USA

• Lifetime Guarantee that Coil Springs Won’t Sag

Tech Info:

• Fits 2007 - Current Jeep Wrangler JK 2wd or 4wd models

• 2 Door Models sit 1/2" - 3/4" taller than 4 door models but still level

• 2012 models require exhaust extension kit (Part # 22011) for proper front driveline clearance

• No driveline modifications necessary if kit is installed as intended (with or without track bars)

• Front End Alignment Required

Wheel & Tire Fitment Info:

OEM Wheels & Tires:    Yes

AfterMarket Wheels:    4.5" Backspace

(wheel spacers required to run factory wheels with an over sized tire)

Aftermarket Tires:     33" tall x 12.50"

(Larger 35" tire packages will fit with minor modifications or aftermarket high clearance fenders, test fitment recommended)

System Components Included:

2007 - Current Jeep JK - 3" Suspension Lift System Stage 4

22010  (QTY - 1)   Jeep JK 3" Front Dual Rate Spring Kit (Pair)

22015  (QTY - 1)   Jeep JK 2" Rear Dual Rate Spring Kit (Pair)

22040  (QTY - 1)   Jeep JK 3" Lift Box Kit (front and rear billet bump stops / front sway bar links / hardware)

21020  (QTY - 1)   Jeep JK Front Adjustable Pan Rod Bar Kit         

21025  (QTY - 1)   Jeep JK Rear Adjustable Pan Rod Bar Kit

27820  (QTY - 2)   Jeep JK 2WD & 4WD 2”-3" Lift Remote Reservoir Front Shock - 2.5 Series

27725  (QTY - 2)   Jeep JK 2WD & 4WD 2”-3" Lift Piggyback Reservoir Rear Shock - 2.5 Series

Options:

27820C    Jeep JK 2WD & 4WD 2”-3" Lift 2.5" V.S. Series Remote Reservoir Front Shocks w/ CDCV

27725C    Jeep JK 2WD & 4WD 2”-3" Lift 2.5" V.S. Series Piggyback Reservoir Rear Shocks w/ CDCV

29920      Jeep JK 2WD & 4WD 2”-3" Lift 2.5" Omega Series Bypass Remote Reservoir Front Shocks

29925      Jeep JK 2WD & 4WD 2”-3" Lift 2.5" Omega Series Bypass Piggyback Reservoir Rear Shocks

22011      Jeep JK Exhaust Extension Kit

22012      Jeep JK Alignment Cam and Knock out Tool Kit

22013      Jeep JK Alignment Cam Kit (Fits in Front Lower or Rear Upper Link position)

22014      Jeep JK Replacement Front Drive Shaft w/ Yoke Adapter (2012 - Current)

22016      Jeep JK Replacement Front Drive Shaft w/ Yoke Adapter (2007 - 2011)

22017      Jeep JK Alignment Cam Knock out Tool

22018      Jeep JK High-Clearance Steering Stabilizer Kit

22019      Jeep JK Front Hydraulic Bumpstop System

21031      Jeep JK Front Lower Fixed Link Kit

21036      Jeep JK Front Upper Adjustable Link Kit

21041      Jeep JK Rear Lower Adjustable Link Kit

21046      Jeep JK Rear Upper Fixed Link Kit

614600    2.0 Aluminum Shock Reservoir Clamp Kit - 2.0 to 2.0 (hose clamp w/ rubber spacer included standard)

611058   Jeep JK Front Remote Reservoir 2.0 / 2.5" Shock Resi Mount Kit (each)

(Standard kit mounts the Remote Reservoirs to the body of the shock. Use this bracket to mount the

 Reservoir forward of the coil bucket to the frame like the picture above)