2017-UP Ford F250/F350 4WD 2.5-3" Coilover Conversion System - Stage 3

NOTE: Availability for this product may vary.  Please call for updated information.

OVERVIEW:

ICON's Stage 2 2.5-3" Coilover Conversion System will add a new level of performance and adjustability to 2017-UP F-250 and F-350 trucks.The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5 Series Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 Series shock line - meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or revalved as necessary.

KEY FEATURES:

• Height adjustable coilovers provide 2.5-3" of front lift height
• ICON shocks feature vehicle specific tune for superior performance and ride quality
• Fits 4WD applications only
• Simple and straightforward installation
• Corrosion resistant CAD plated shock body with 7/8″ shaft (2.5 Series shocks)
• Corrosion resistant anodized shock body with 5/8″ shaft (2.0 Aluminum Series shocks)
• Shocks are fully rebuildable and revalveable
• 1 year warranty on ICON 2.5 Series and 2.0 Aluminum Series shocks
• Lifetime warranty against ICON fabricated component breakage or manufacturer defect

WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 8.5" Wide, 5" Backspace

Aftermarket Tires: 35 x 12.50

(Larger Tires May Fit but Fender Trimming and Modifications will be Required)

SYSTEM COMPONENTS:

61720 (QTY.1) | 05-UP FSD 4WD 2.5-3" 2.5 VS RR BOLT IN CO CONVERSION KIT

64038 (QTY.1) |17-Up FSD ADJ Track Bar Kit|

37705P (QTY.1) |99-up FSD  0-3 inch Rear 2.5 VS PB (Pair)

NOTE:  After a thorough analysis of 2020 Ford F250/F350 Super Duty trucks, ICON engineers determined that our current (2017-UP) suspension systems and components are compatible with these new vehicles. While the suspension components fit without issue, be advised that 2020 Super Duty models have a lower ride height from the factory than 2017-2019 trucks. This results in an increase of approximately .75" of additional lift height over ICON's advertised numbers.