OME 80 Series Land Cruiser BP-51 4" Long Rear Shock

NOTE: Availability for this product may vary.  Please call for updated information.

BP-51 suspension for the Toyota Land Cruiser 80 Series. SOLD INDIVIDUALLY Need to order two to make a pair. 

Old Man Emu (OME) BP-51 High Performance Internal Bypass Shock Absorbers engineered specifically for the Toyota Land Cruiser 80 Series. long travel version suitable for lifts of 75-100mm (3 to 4 inch).

The shock for the 80 Series has been tuned specifically to the vehicle geometry, weight and OME coil springs. Extensive testing was conducted to ensure the vehicle has a high amount of roll control but still provides the plush ride of the BP-51Shock Absorber. Extensive off road testing was also conducted to ensure that the vehicle can handle a wide variety of terrain for years to come.

The rear shocks have been designed with a simple bracket that mounts to the chassis rail. Recommended compression and rebound settings can be found in the supplied fitting instructions for loading scenarios that utilize the various spring options available. The fitting instructions include detailed information for correct installation of the shock absorber and reservoir placement. 

Extended Length: 26in

Compressed Length: 16in

Some of the key areas to consider include but not limited to:

• Bump stop spacers
• Brake lines
• Wheel alignment and steering geometry
• Panhard length and axle location
• Shock body clearance
• Compatibility to other aftermarket accessories and driveline angles 
• Coil entrapment

Vehicle Specific Applications

• No fitting modifications are needed
• All reservoir brackets have been integrated into the geometry of the Landcruiser 80 Series

OME BP-51 Land Cruiser Key Features & Benefits

• Internal bypass, shim controlled, position sensitive damping
• Provides comfort at ride height
• Damping increases as you get closer to the end zones
• Increased control at end zones
• Kidney bypass ports / 2in bore diameter
• Maximum bore size and bypass diameter
• More tunable, ability to generate force
• Vehicle specific application
• No fitting modifications required
• External compression and rebound adjustment
• On vehicle adjustable
• Independent adjustment of compression and rebound
• Ultra wide range to suit varying loads and ride preferences
• Body/reservoir/components 6061 T6 aluminum
• Heat dissipation
• Corrosion resistant
• Type 3 40 Micron hard anodized finish
• Abrasion resistance to stone damage
• DASH 6 high temperature Teflon hose with high flow fittings
• No restriction of oil flow
• High pressure nitrogen reservoir with aluminum, anodized floating piston
• Increased oil volume
• Maximize travel
• Cater for varying loads
• Impact resistant, replaceable shaft guard
• Quality oversized rubber bushings
• Large Teflon lined spherical bearings
• Durable
• 3 year / 37,000 mile warranty