Metal Tech FZJ80 2" Front spacer plates, Pair w/ hardware

Description
Additional Information

Metal-tech 4x4 80 Series Land Cruiser Front 2" Spacer Plates

Two completely welded spacer plates for your front springs. These FJ80 2" front spring spacers start as two CNC water jet cut ¼” thick plates then a center section is welded between the two. We weld the top bolts in place to aid in installation, include washers and nylock nuts for mounting. The plates are sandblasted and powder coated for a lasting finish. These Land Cruiser 80 coil spacers come as a pair and are available in spacing of 2.0” (also available as 1.5").

(Note: As with any spacers used on the front end you will need to adjust your caster to keep it to factory specs when using this product.)

No more cracked out falling apart rubber spacers!

Estimated Install Time: 1.5 hours

Install Guide

FZJ80 2" Front spacer plates w/ hardware fits the following vehicle(s):

1993-1997 Toyota FZJ80 Land Cruiser
1996-1997 Lexus LX450

For 1991-1992 FZJ80's it is possible to flip the mount over (the side with just holes of the mount) to match it up. The mount will need to be modified by removing one of the pre-welded bolts and using a loose bolt to bolt it up. This is an option, but it will take work.

Make:: Toyota
Model:: 80 Series Land Cruiser
Year:: 1993
Year:: 1994
Year:: 1995
Year:: 1996
Year:: 1997
Make:: Lexus
Model:: LX450