FJ40 Land Cruiser Steel Roll Cage Kit

Description
Additional Information

Metal Tech 4x4 FJ40 Land Cruiser Full Profile Roll Cage Kit

The Full Profile FJ40 Land Cruiser Steel Roll Cage Kit is designed to give you that custom fit without the headache of designing the cage from scratch. We pre-bend all of the tube for you ensuring a perfect fit. The tubes are notched at one end with a little extra length left on the other end to give you some room for alignment and fit up depending on your preference. The Full Profile cage is perfect if you have a forward facing rear seat giving your passengers some added protection. You can use this cage with the side folding seats requiring some modification to the seat brackets. Or consider our Jackson Cage Kit which works better with the side folding seats. For your convenience our roll cages fit the factory hard top and any aftermarket soft top.

Our FJ40 Land Cruiser Steel roll cage is made our of 2" x 120 wall DOM SRA tube that is custom made to our specification. While regular DOM tube has an elasticity of 10-12%, ours yield 20-24% elasticity which allows the cage to absorb more impact in the event of a roll over. These cages are properly designed in compliance with SCORE racing standards.

Full Profile Cage Kit Includes:

(2) A pillars
(2) Front mounting plates
(1) A-A cross bar
(1) B pillar
(1) C pillar
(2) Rear mounting plates
(2) C to B Diagonal supports
(2) B to A pillar supports
(2) Rear Overhead Bars

Optional Accessories:

Seat Belt Tabs & Brackets (SKU# MT-FJ40-1001)
Grab Handles (SKU# MT-FJ40-11008)
Front overhead bars (SKU# MT-FJ40-13033)
Dash Cross Bar (SKU# MT-FJ40-1018)
Roll Cage Bolt Kit (SKU# BK-MT-FJ40-10000)
Front Frame Tie Kit (SKU# MT-FJ40-1014)
Rear Frame Tie Kit (SKU# MT-FJ40-1015)

We have started building pre-built roll cages again. Please take a look at our options here: https://metaltech4x4.com/roll-cages/

If you have any questions, just contact us at: info@metaltech4x4.com or 503-822-1111

***NOTE No product can protect a person from the danger of operating a motor vehicle, therefore; All cages are for show purposes and not intended for a life saving device.

One of the most popular configurations is to add the grab handles, dash crossbar and the front center over head bars. Frame ties in the front are always recommended, however rear frame ties are needed when a tub may have less "sound" i.e. rust. The rear overhead bars would be next up in the items to add, just keep in mind head room for your potential rear passengers. The hip guards and the rear seat belt cross bar are items you may wish to add for a more aggressive use of your truck, note these items can be added in at a later date too. NOTE: Seat Belts, if you're running retractable shoulder belts we have universal mounting plates we can add in to provide the lower retractor mounting and the upper shoulder pivot point.

This product requires cutting and grinding and welding to fit together!

FJ40 Land Cruiser Full Profile Roll Cage Kit fits the following vehicle(s):

1963-1983 Toyota FJ40 Land Cruiser

Make:: Toyota
Model:: FJ40 Land Cruiser
Year:: 1963
Year:: 1964
Year:: 1965
Year:: 1966
Year:: 1967
Year:: 1968
Year:: 1969
Year:: 1970
Year:: 1971
Year:: 1972
Year:: 1973
Year:: 1974
Year:: 1975
Year:: 1976
Year:: 1977
Year:: 1978
Year:: 1979
Year:: 1980
Year:: 1981
Year:: 1982
Year:: 1983