Metal-tech 2021+ Ford Bronco 4-door Rock Sliders - Scratch and Dent

Was: $1,495.95
Now: $1,095.95
  • Description

These come powder coated already, the prices has this add-on included.


These sliders are our first run of prototype rock sliders that were made for the 6G Bronco. There were a few adjustments we had to make, so we did some grinding and re-welding. They fit and function 100%, they might need some additional work or adjusting to bolt on. They are just not fully powder coated as we used a rattle can to do touch up on areas we adjusted. The paint we used is a direct match to the powder coating and purchased from the company that sells the powder coat we use on all of our products.

2021+ Bronco Frame Mounted Rock Sliders - 4 Door / Bronco Raptor Sliders

Limited Lifetime Slider Warranty: If you ever bend a Metal-tech 4x4 slider, contact us, send it back, and we will fix or replace it. More information available on our warranty page. 

Frame mounted step sliders: 100% bolt on, no drilling to your frame, keeping the rock sliders off the body mounts. We bolt the rock sliders to the strongest part of your Bronco, the frame. Body mounted "rails" cannot take the same loads as a real frame mounted rockslider. The Metal-tech 4x4 frame mounted step sliders can take the full weight of your truck, yet the flat top deck is a perfect step for getting in and out of your vehicle. Two dimple die 1/8" pressed step plates are welded to the top of the sliders making for a great way to access the roof of your vehicle. The sliders are finished with sandblasting and powder coating for durability.     

Featuring Metal-tech 4x4s Trade Marked two stage rub rail. The primary DOM rail extends past the radius of your door, as you slide along it, the second stage engages and will push your truck away from obstacles. U.S. Trademark Registration No. 4,010,850 

Metal-tech 4x4 2021+ Ford Bronco Rock Sliders are made 100% in the USA using 2x4" wide, 3/16" thick US made steel box tube with mitered ends as the main slider body, 3x1.5" box tube for support legs and custom laser cut mounting feet made out of 1/4" plate! Our rub rails are made out of 1.75x.120" wall DOM SRA steel tube as standard for the best rocker protection and a confident recovery hi-lift jack point. 

Easy installation: Mounting system is 100% bolt on, using a combination of sub brackets and U-bolts over the frame. Metal-tech 4x4 has used the same U-bolt system for over 20yrs in our proven FZJ80 and UZJ100 Landcruiser Sliders; conquering the toughest trails from Rubicon to Moab. Video installation guide below, with easy-to-follow step by step directions.

Contains: Left Bolt on Step Slider, Right Bolt on Step Slider, Left Sub bracket, Right Sub bracket, Bolt kit  

Link to video installation guide 


Scratch and Dent Disclaimer:

Scratch and dent items may have been previously installed for testing purposes or mock-ups. Some may have manufacturing errors or blemishes, and some may have slight damage from shipping such as dents, scratches or nicks in coatings and finishes. Could possibly be open boxes, possibly used or installed, or returned items in like new condition. Some items may be missing small components you may need to source yourself.

We have tried to share the issue with each item, though there may be additional issues.

All items will be shipped as-is, oftentimes without wrapping, box or pallet.

Metal-tech 4x4 will not be responsible for any damages that occur upon the shipping of this product.

Some items might not have packaging at all and no claims will be done for any orders with the shipping company
Some pictures displayed are of an original/new item used for reference only. They do not represent the condition of the item(s)




Videos Hide Videos Show Videos

Military First Responders Medical Teachers


Metal-Tech 4x4 supports the heroes among us click for more info

All prices are in USD. ©2024 Metal Tech 4x4 | Sitemap | Website: Northwest Web Development