Light Racing 1996-04 Tacoma/1996-02 4Runner SPC Upper Control Arms

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with these adjustable SPC upper control arms. Featuring an upgraded greaseable ball joint and SpecRide™ bushings, this light racing Tacoma UCA is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel designs provide the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.

• Get more droop travel: SPC upper control arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting bushings, SPC's arm gives you maximum droop travel.

• Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s upper control arms have +1° of caster built into them. Using its patented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber, so you can put your alignmnet angles back to specification.

• Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.
  

Do you need replacement cams for the lower control arm? Check out SPC p/n 25430, which will replace corroded cam bolt assemblies.

Adjustment range: Camber ±2.0°
Caster 0.0° to +4.0°
Installation time: .8 hr/side

Patent No. US 7,513,514 B1